Nano technology products for surface coating

PRIMER XT

PRIMER XT is specially designed water borne acrylic primer for exterior wall finishes. It provides excellent bond between the substrate and finish coat.

Typical applications

  1. On all kind of Exterior surfaces
  2. Can be used as a primer for plastered wall, asbestos, bricks and concrete

Features & Benefits

  1. Ease of application
  2. Excellent coverage
  3. Fast drying- Quick turnaround time
  4. Excellent resistant to water and alkali
  5. Good opacity and whiteness
  6. Good sealing properties
  7. Provides excellent bonding to finish coats with the substrates
  8. No fungus, alga, mildews growth on the cured paint film
  9. Minimum surface cleaning is needed


Application Guidlines

Technical Information

White
120 - 150 Sq Ft in 1 Coat*
Pack Size 1, 4 & 20 Ltr

Surface preparation

    Surface must be free from dirt, grease, oils and any other foreign substances. Any flakes of old paint or powdery residues must be scrapped off and cleaned thoroughly by sanding using an emery paper. Algae and fungus on walls to be removed by high pressure water wash or coir brush and apply Bio-Wash fungicidal solution if needed. Fill all cracks, dents and holes with suitable crack filling chemicals prior to primer application. New masonry surfaces should allow curing it completely. Recommended curing time for new masonry surfaces is 28 days.

Mixing and Application

    Apply PRIMER XT on well-prepared surface and allow it to dry for 3-4 hrs prior to the application of finish coats.

    Stir the primer before application and then thin down to applicable consistency with required quantity of potable water. Mix thoroughly till the components become homogenous. Apply the primer liberally with paint brush followed by rollers.

Cleaning

    Clean all tools and spillage of paint with water immediately after application.

Precautions & limitations

  1. Once base is mixed with hardener, paint should be consumed within pot-life.
  2. Do not apply when concrete surfaces or ambient temperatures are below the dew point.
  3. Material and the substrate temperature should be above 10°C and below 50°C before use.
  4. Application on direct sunlight and windy situation may affect the paint performance

Product Specifications

  1. Storage: Store in cool & dry place.
    Keep container tightly closed in a secure, upright position. Store in accordance with local regulations.
  2. Packing: 1, 4 & 20 ltr
  3. Shelf life (when stored as recommended): Min 24 months

SAFETY INFORMATION

    Always work in a well-ventilated area. As a general safety measure, inhalation of vapors or coating mist and contact of coating with skin & eyes should be avoided. Wear appropriate attire, especially gloves, respiratory musk and eye protection gears. Any spillage or splashes of paint flash with plenty of water. Keep paint away from foods, drinks or animal feeds. In case of irritation in direct body contacts or any other health issue sick medical advice.

ENVIRONMENTAL SAFETY

    Does not contain any added lead, mercury, chromium or any heavy metal compounds.
Crafted by Colorzweb