Premium acrylic emulsion for smooth and luxurious wall finish

Product Description

DÉCOR SILK E2C is water borne interior paint with smooth, high sheen and luxurious finish. DÉCOR SILK E2C is formulated with modified acrylic emulsion to enhance washability for better durability along with the microbial resistant additives to prevent walls from fungal and algae attacks.

Benefits & areas of application

  • Waterborne low VOC interior paint
  • Smooth and luxurious finish
  • Rich and high sheen
  • High scrub resistant
  • Prevent fungus and algae's growth
  • Free from heavy metals

Technical information

  • Materials: Single pack acrylic emulsion
  • Color: Available in all shades
  • Finish: Smooth
  • Recommended DFT: 30-50 micron/coat
  • Touch dry time: 15-20 min
  • Recoatable time: Min 3 hrs. (depending on air temperature & humidity)
  • Coverage: Approx. 120 - 150 sq.ft. / litre in two coats
  • Cleaning solvent: Water
  • Recommended dilution (with water only): 10-30%

Application Guideline

Surface Preparation:

Surface must be free from dirt, grease, oils and any other foreign substances. Any flakes of old paint or powdery residues must be scrapped off and cleaned thoroughly by sanding using an emery paper. Algae and fungus on walls to be removed by high pressure water wash or coir brush and apply Bio-Wash fungicidal solution if needed. Fill cracks with suitable crack filling chemicals prior to start the painting job.

Apply DÉCOR PRIMER on well-prepared surface. Apply suitable putty to remove the undulation on the surface. Once the putty dries sufficiently hard smoothen the surface by sanding with emery paper No. 320. Apply one coat of DÉCOR PRIMER on the sanded surface and allow it to dry for 4-6 hrs prior to the application of DEOR SILK E2C.


Clean all tools and spillage of paint with water immediately after application.


Mixing Application:

Stir the paint before application and then thin down to applicable consistency with required quantity of potable water. Mix thoroughly till the components become homogenous. Apply the paint liberally with paint brush followed by rollers. Apply 2-3 coats of DEOR SILK E2C to achieve the desire opacity as well as finish depending on the shades. Provide 6-8 hrs drying interval in between the coats

  • DÉCOR SILK E2C is for Interior use only
  • Do not apply when concrete surfaces or ambient temperatures are below the dew Point
  • Material and the substrate temperature should be above 10°C and below 50°C before use

Product specs:

  • Storage: Store in cool & dry place. Keep container tightly closed in a secure, upright position. Store in accordance with local regulations.
  • Product Shelf life: Min 36 months
  • Available pack size: 1, 4, 20 ltr