Nano technology products for surface coating

DECOR STAINGUARD - 2K

Interior coating with extremely high scrub resistant. Can be applied on damp concrete

DECOR STAINGUARD - 2K

DECOR STAINGUARD - 2Kis a specially designed, one of its kind, paint for Interior walls like kitchen, bathroom, drawing and bedroom walls where tough stains can easily be cleaned by mechanical scrubbing or with any common cleaning agents. It's a two components, reactive semi-glossy water borne paint, once dried, forms highly cross-linked polymer network that can withstand the scrubbing action of highly abrasive materials like 'Scotch Brite'. The paint film is also highly chemical resistant and remains unaffected by strong detergents, acidic cleaning agents or any other cleaning solvents.

Typical applications

  1. Drawing and bedrooms walls and ceilings
  2. Kitchen walls & ceilings
  3. Bathroom walls & ceilings
  4. Community hall walls & ceilings
  5. Children rooms
  6. Corridors
  7. Dado areas

Features & Benefits

  1. Water-borne highly cross-linked polymer
  2. High mechanical robustness
  3. All types of tough stains can be cleaned easily
  4. No film deterioration or color change on high scrubbing
  5. Resistance to all commercial cleaning agents (domex, harpic, dettol, savlon etc.)
  6. Can be cleaned with mild abrasives with most detergents and solvent like alcohol
  7. Excellent water and chemical resistance
  8. Can be applied on damp surfaces
  9. Work against rising dampness
  10. No fungus, alga, mildews growth on the cured paint film
  11. Minimum surface cleaning is needed


Application Guidlines

Technical Information

  1. Materials: Two packs reactive system
  2. Color: Base white
  3. Mix ratio (base: curing agent): 87:13 (wt/wt)
  4. Recommended DFT: 30-35 micron/coat
  5. Pot life: 4 hr (max) @ 30°C
  6. Touch dry time: 45-60 min
  7. Re-coatable time: Min 8-10 hrs
    (depending on air temperature & humidity)
  8. Full cure: 12-24 hours
  9. Finish: Egg shell; semi glossy
  10. Coverage: 80 - 120 sq.ft. per ltr in two coats
  11. Cleaning solvent: Water
  12. Scrub value: >3000
  13. Recommended dilution (with water only):
    ˜ Brush and roller application: 10-15% by volume
    ˜ Spray application: 15-20% by volume

Surface preparation

    Surface must be free from dirt, grease, oils and any other foreign substances. Any flakescof old paint or powdery residues must be scrapped off and cleaned thoroughly by sanding using an emery paper. Algae and fungus on walls to be removed by high pressure water wash or coir brush and apply Bio-Wash fungicidal solution if needed. Fill cracks with suitable crack filling chemicals prior to start the painting job.

    Apply Prime on well-prepared surface. Apply suitable putty to remove the undulation on the surface. Once the putty dries sufficiently hard smoothen the surface by sanding with emery paper No. 320

Mixing and Application

    Stir the base and hardener parts separately before mix them together. Mix hardener gradually into the base container (not the reverse) under continuous stirring. Always mix the full quantity as supplied to avoid improper curing issues. A suitable power mixer is recommended for uniform mixing of the product. Continue the mixing for 3-5 minutes. Allow induction time of 10 minutes and then thin down to applicable consistency with required quantity of potable water. Mix thoroughly till the components become homogenous. Apply the paint liberally with paint brush followed by rollers. Apply 2-3 coats of DECOR STAINGUARD - 2K to achieve the desire opacity as well as finish, depending on the shades. Provide 4-5 hrs drying interval in between the coats.

Cleaning

    Clean all tools and spillage of paint with water immediately after application.

Precautions & limitations

  1. DECOR STAINGUARD - 2K is for Interior use only.
  2. Once base is mixed with hardener, paint should be consumed within pot-life.
  3. Do not apply when concrete surfaces or ambient temperatures are below the dew point.
  4. Material and the substrate temperature should be above 10°C and below 50°C before use. Application on direct sunlight and windy

Product Specifications

  1. Storage: Store in cool & dry place.
    Keep container tightly closed in a secure, upright position.
  2. Packing: 2 & 5 ltr
  3. Shelf life (when stored as recommended): Min 12 months
Site designed & maintained by : Design Dynamics